Core Shooting, Sand Core Making, Shell Molding Machine - KKA - Shell Moluding, Core Shooting, Sand Core, Foundry Core Making Machines

Core Shooting Machine & Shell Molding Machine－Vertical - KKA

KKA Specification

Model	KKA-430	KKA-530	KKA-440	KKA-540	KKA-550	KKA-640	KKA-650
Core Box Size (L x H x W)	450 x 300 x 250 mm	500 x 300 x 250 mm	450 x 400 x 250 mm	500 x 400 x 250 mm	550 x 400 x 300 mm	600 x 400 x 300 mm	650 x 500 x 300 mm
Max. Core Size (L x H x W)	370 x 280 x 200 mm	420 x 280 x 200 mm	370 x 380 x 200 mm	420 x 380 x 200 mm	470 x 380 x 250 mm	520 x 380 x 300 mm	570 x 480 x 300 mm
Operation Mode	Manual/Single Cycle/Auto Cycle
Production Speed	40 ~ 70 seconds/cycle, depends on size and shape of products
Heating Type	LPG or Electrical
Max. Blowing Capacity	10-20 kgs	15-25 kgs	15-25 kgs	15-25 kgs	15-30 kgs	15-30 kgs	15-30 kgs
Sand Storage Capacity	200-300 kgs
Operation Pressure	5-6 kgs/cm²
Sand Blowing Pressure	1-4 kgs/cm²
Weight	2500 kgs	2600 kgs	2600 kgs	2700 kgs	2800 kgs	2900 kgs	3000kgs
Dimension	2100 x 3450 x 3050 mm	2100 x 3450 x 3050 mm	2100 x 3500 x 3100 mm	2100 x 3500 x 3100 mm	2300 x 3600 x 3200 mm	2500 x 3700 x 3300 mm	2650 x 3750 x 3400 mm

※Specifications or dimensions are subjected to change without prior notice.

Address ： No. 39, Alley 42, Lane 1463, Kwang Hsiw Rd., Taiping , Taichung, Taiwan, R.O.C.

Office ： TEL: +886 - 4 - 727 0368　 FAX: +886 - 4 - 725 5365

Factory ：　TEL: +886 - 4 - 22782219　 FAX: +886 - 4 - 22787677

Hot Box Sand Core, Hot Box Shell Molding, Hot Box Core Shooting, Hot Box Core Making, Foundry Equipment

	搜尋這個協作平台